Straightener Series JM PRECISION THIN-SHEET STRAIGHTENER

JM PRECISION THIN-SHEET STRAIGHTENER


JM PRECISION THIN-SHEET STRAIGHTENER

Features:

  • Tt is suitable for straightening all kinds of high precision metal material.
  • This machine is the powerful new equipment which is used for high speed press work.And it can advavce pressing product's quality and quantity.
  • Fine electric parts can not be finished with high accuracy unless straightened coil materials may achieve.So Roll material need to be straightened,and the stress be moderately removed.
  • After being straightened,materials can be curled upward or downward or flat easily.
  • As bearings of work-rolls are,of a oiling,lubricating free type,there will be no trouble from the adherence of oil or dirt.
  • The drive unit is controlled by an inverters(cycle control) to feed smoothly at a speed synchronized with the press.
  • Two sections type straightening device,it is no need to adjust straighten function when rolled materi al is under straightening process(from start to end).To ensure the material at same flatness completely.
  • We Accept Special Purposed Machine Orders.
  • Adopt transducer timing,which is can running placidity.

JM18 PRECISION STRAIGHTENER

Models JM18-100 JM18-200 JM18-300
Material Width 100 mm 200 mm 300 mm
Material Thickness 0.1-0.5 mm 0.1-0.5 mm 0.1-0.5 mm
Correction Axis ⌀12 * 23 branches (under 11 on 10) ⌀12 * 23 branches (under 11 on 10) ⌀12 * 23 branches (under 11 on 10)
Straightening Method 4-point micro-adjustment
Power AC three-phase voltage 220/380V
Straightening Speed 15m/min 15m/min 15m/min

JM20 PRECISION STRAIGHTENER

Models JM20-100 JM20-200 JM20-300 JM20-400
Material Width 100 mm 200 mm 300 mm 400 mm
Material Thickness 0.15-0.6 mm 0.15-0.6 mm 0.15-0.6 mm 0.15-0.6 mm
Correction Axis ⌀20 * 18branches (under 10 on 8)
Straightening Method 4-point micro-adjustment
Power AC three-phase voltage 220/380V
Straightening Speed 15m/min 15m/min 15m/min 15m/min

JM32 PRECISION STRAIGHTENER

Models JM32-100 JM32-200 JM32-300 JM32-400 JM32-500
Material Width 100 mm 200 mm 300 mm 400 mm 500 mm
Material Thickness 0.2-1.2 mm 0.2-1.2 mm 0.2-1.2 mm 0.2-1.2 mm 0.2-1.2 mm
Correction Axis ⌀32 * 19branches (under 10 on 9)
Straightening Method 4-point micro-adjustment
Power AC three-phase voltage 220/380V
Straightening Speed 15m/min 15m/min 15m/min 15m/min 15m/min

*Right of modification reserved.
*All specifications,dimensions and design characteristics shown in this page are subject to rechange without notice.